不同引渠形式下深式短管进口泄流能力的试验研究

为研究红岩河水库导流泄洪洞深式短管进口引渠形式由明渠改成涵洞后对其泄洪能力的影响,对其在明渠和涵洞两种形式下分别做水工模型试验,验证其水力特性。结果表明,较明渠形式,涵洞形式下的导流泄洪洞同水位下泄流量有不同程度的减小,下泄流量减小在导流泄洪洞进口为压力流状态时表现明显,且减小值随水位的升高而变大;大坝度汛期100年一遇洪水时,试验下泄流量较设计下泄流量约小6.35%;运行期100年一遇洪水时,试验下泄流量较设计下泄流量约小6.51%;运行期2 000年一遇洪水时,试验下泄流量较设计下泄流量约小6.95%。建议在将红岩河水库导流泄洪洞深式短管进口引渠由明渠改成涵洞形式后,需关注导流泄洪洞的下泄流量减小问题,避免由于水库下泄流量不足引起的大坝安全问题。     

浙东运河闸坝控制工程及其技术特征研究

浙东运河是中国大运河的重要组成部分、是内河水运网络与海运联接的纽带。与大运河其他河段相比,浙东运河水系水文、控制工程有其鲜明特点。本文基于水利工程科技史的视角,对浙东运河水系构成及分段特点、浙东运河控制工程分布、闸坝工程型式与功能特征及其原因进行了系统分析,对浙东运河宁波段极具特色的闸坝功能划分特征、闸坝结合的工程型式产生及其技术特点进行了考证、分析,从中国大运河整体视角审视浙东运河水利工程遗产的特点及其科技价值。     

丹江生态流量计算研究

丹江是汉江的重要支流,水力资源较为丰富,在河南省境内丹江干流上建有两座小型水电站,水力发电效益较好,但对下游河道生态造成了不利影响。本文根据实测流量资料,采用水文学方法进行河道生态流量计算,提出丹江干流水电站下泄生态流量要求及保障措施,为丹江河南段的水生态保护提供借鉴和参考。     

Water abundance of mine floor limestone by simulation experiment

The water abundance of mine floor limestone needs to be solved urgently as the average depth of coal mining in China has increased gradually. A method is presented to discuss water abundance with the numerical and physical layered geoelectrical model being established in the half-space, full-space and full-space with tunnel, respectively. The parameters of water abundance are changed in this study, which includes water quantity, water content and volume of abnormity of water-containing abnormity. Results indicate that the different work fields have different macroscopic influences on the apparent resistivity,and the water abundance parameters of water-containing abnormity have quantitative relationship with the apparent resistivity mean in abnormal regions(three-dimensional space region). The quantitative relationships are shown as following: firstly, the amount of water injection has negative linear correlation with the apparent resistivity mean; secondly, when abnormity is unsaturated, there is a negative power function relationship between water content and apparent resistivity mean; thirdly, the volume of abnormity and apparent resistivity mean behave as a decreasing power function law.     

Determination of volumetric changes at an underground stone mine: a photogrammetry case study

Photogrammetry, as a tool for monitoring underground mine deformation, is an alternative to traditional point measurement devices, and may be capable of accurate measurements in situations where technologies such as laser scanning are unsuited, undesired, or cost-prohibitive. An underground limestone mine in Ohio is used as a test case for monitoring of structurally unstable pillars. Seven pillars were photographed over in a 63 day period, punctuated by four visits. Using photogrammetry, point clouds of the mine geometry were obtained and triangulation surfaces were generated to determine volumes of change over time. Pillar spalling in the range of 0.29–4.03 m³ of rock on individual rib faces was detected. Isolated incidents of rock expansion prior to failure, and the isolated failure of a weak shale band were also observed. Much of the pillars remained unchanged during the monitoring period, which is indicative of proper alignment in the triangulated surfaces. The photographs of some ribs were of either too poor quality or had insufficient overlap, and were not included. However, photogrammetry was successfully applied to multiple ribs in quantifying the pillar geometry change over time.     

A comparative study of dust control practices in Chinese and Australian longwall coal mines

Mine dust is one of the main hazards in underground longwall mines worldwide.In order to solve the mine dust problem,a significant number of studies have been carried out regarding longwall mine dust control,both in China and Australia.This paper presents a comparative study of dust control practices in Chinese and Australian longwall mines,with particular references to statutory limits,dust monitoring methods and dust management practices,followed by a brief discussion on the research status of longwall mine dust control in both countries.The study shows that water infusion,face ventilation controls,water sprays,and deep and wet cutting in longwall shearer operations are commonly practiced in almost all underground longwall mines and that both Chinese and Australian longwall mine dust control practices have their own advantages and disadvantages.It is concluded that there is a need for further development and innovative design of more effective dust mitigation products or systems despite the development of various dust control technologies.Based on the examinations and discussions,the authors have made some recommendations for further research and development in dust control in longwall mines.It is hoped that this comparative study will provide beneficial guidance for scholars and engineers who are engaging in longwall mine dust control research and practice.     

发电企业与电网企业上网电价的博弈

借助博弈理论,以社会效益的最大化和新能源发电企业的可持续发展为目标,建立了一种发电企业和电网企业在不完全信息条件下对于上网电价的贝叶斯博弈,确定了上网电价的定价策略,通过测算分析,验证了模型的适用性.     

水气分离集成井降水强夯法试验研究

为了克服降水强夯法处理深度小、降水时间长的缺陷,结合扬中灏港通用码头软土地基处理工程,改进了传统降水强夯工艺,采用水气分离集成井降水联合强夯法进行加固处理。通过在常规真空井点降水强夯和改进降水强夯两个试验区开展现场监测和检测试验,对加固效果进行了对比评价分析,研究结果表明:水气分离集成井降水强夯工艺降水深度可达地表以下5~6 m,夯后孔压消散时间约为1~2天;地基加固后总地表施工期最大沉降量为0.606 m,可有效减小工后沉降;与常规井点降水强夯法相比,改进法加固后土体强度和地基承载力均有较大提高,地基加固效果优势明显。     

高速公路入口自适应性超限检测站成本节约估算模型及评价

为对高速公路入口自适应性超限检测站进行经济性估算,采用阶段预测方法建立成本节约估算模型,分析收费站入口货车延误影响因素,形成入口延误时间节约估算方法;引入TTI模型估算路段客货车延误成本节约,依据实际道路交通情况,分析并得出养护成本节约估算方法;结合自适应性超限检测站的投资建立有效的成本节约估算模型,将各项节约项目进行量化.该估算模型可从经济角度为自适应性超限检测站的设置提供理论支持.     

Thermo economic evaluation of oxy fuel combustion cycle in Kazeroon power plant considering enhanced oil recovery revenues简

Oxy fuel combustion and conventional cycle （currently working cycle） in Kazeroon plant are modeled using commercial thermodynamic modeling software. Economic evaluation of the two models regarding the resources of transport and injection of carbon dioxide into oil fields at Gachsaran for enhanced oil recovery in the various oil price indices is conducted and indices net present value （NPV） and internal rate of return on investment （IRR） are calculated. The results of the two models reveal that gross efficiency of the oxy fuel cycle is more than reference cycle （62% compared to 49.03%）, but the net efficiency is less （41.85% compared to 47.92%） because of the high-energy consumption of the components, particularly air separation unit （ASU） in the oxy fuel cycle. In this model, pure carbon dioxide with pressure of 20~ 105 Pa and purity of 96.84% was captured. NOx emissions also decrease by 4289.7 tons per year due to separation of nitrogen in ASU. In this model, none of the components of oxy fuel cycle is a major engineering challenge. With increasing oil price, economic justification of oxy fuel combustion model increases. With the price of oil at $ 80 per barrel in mind and $ 31 per ton fines for emissions of carbon dioxide in the atmosphere, IRR is the same for both models.